mastermalik5
Enthusiast
Nov 23, 2005, 12:56 PM
Post #1 of 23
(9243 views)
Shortcut
|
|
How To Burn Your PS2 Games With/Without Mod Chip
|
Can't Post
|
|
Burning PS2 game Backup Discs Step-By-Step by Tanna PunTuShyd
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
Your little sister just used your PS2 disks as pie crusts for some EZ-Bake Oven(tm) mud pies. You're screwed unless, of course, you made backup copies. Here's how...
Burning PS2 game Backup Discs Step-By-Step
- If you have a mod chip.
- If you don't have a mod chip.
(1) If you have a mod chip
If you don't have a mod chip for your ps2, dont worry you can still play backups of your GAMES, It's just alot more hassle. So i would advise you to get one.
http://www.modchip.com/
If you do have a chip scroll down to (2)
Part A: Extract ISO image to hard-drive
- Open CDRWin
- Click the Extract Disc/Tracks/Sectors (Middle button on the top row) A new window will now appear. Here are the settings, shown in the picture here.
- Extract Mode: Disc Image/Cuesheet
- CD Reader: Select your reader
- Image Filename: Select a directory and filename Reading Options
- RAW, CD+G, CD-TEXT, MCN / ISRC all unchecked
- Error Recovery: Ignore
- Jitter Control: Disable
- Subcode Analysis: Auto
- Data Speed: Select your speed
- Audio Speed: Select your speed
- Read retry count: Anything from 2-10
- Subcode Threshold: 300
- Click Save Settings if you wish
- Click Start!
CDRWin will now save the image to your hard-drive.
Part B: Patching Image
- Open AddZer0 FrontEnd.
- Browse for your input file. You just made it with CDRWin.
- Do the same for the output file.
- Select the type of patch to apply to your image.
Auto Mode converts the current Input Image to a 2048 ISO. The image is then patched, placing system.cnf at LBA 12231. This requires no other help from you.
Normal Mode functions just as the original version of AddZer0 did. If you select this mode, type the LBA of the closest file to LBA 12231 into the text box. (You need ISO Buster) This will move this file to 12232 and place the system.cnf at 12231.
Patcher Mode functions just like the 2SP Patcher did. It blindly takes the system.cnf file and places it at 12231. This will possibly corrupt data of the image which cause problems while playing the game. Therefore this mode is not recommended. - When you are happy with the settings, click Convert.
- Wait for the process to finish (might take a while)
Part C: Burning image
- Open CDRWin again.
- Click the File Backup and Tools button.
- Change Backup/Tool Operation to Record an ISO9660 image file.
- Where it says Image Filename: Browse for the image you have just patched.
- CD Recorder: Select your CD-Writer
- Disc Type: CDROM-XA
- Track Mode: MODE 2
- Select your write speed.
- Click Start.
- Wait for CDRWin to write the image to a CD-R.
You should have successfully made a backup of your PS2 game.
(2) If you don't have a mod chip.
I suggest you use CloneCD or CDRWin to do a straight CD copy. This gives you an un-patched backup.
If you have CloneCD or CDRWin (UTFSE) here are the settings:
CloneCD
- Open CloneCD.
- Click the Copy CD Picture (3rd Picture along)
- Read Tab
- Select your CD Reader.
- Select your read speed. I suggest you keep it low. Sorry if you have little patience.
- Read SubChannel Data from Data Tracks: Checked
- Read SubChannel Data from Audio Tracks: Checked
- The other boxes can be left unchecked.
- Image File Tab
- Browse for the directory that you want the image file to be extracted to.
- Check the Delete After Successful Write box if you want.
- Write Tab
- Select your CD Writer.
- Select your write speed. I strongly suggest you burn at a maximum of 4x.
- Everything should be all right as it is.
- Ignore the Global tab. It is not important.
- Now click the Start Disc Copy button at the bottom.
- CloneCD will then read the disc and when finished write to a blank disc.
- Finished.
CDRWin
- Open CDRWin.
- Click the Backup Disc button (Second along)
- Backup Mode: Copy To Image And Record
- Image disk: Select your hard drive (Default)
- CD Reader & CD Recorder: Set CD reader & CD recorder to the same (Always read with burner)
- Reading Options
- Read: Raw Sectors
- Error Recovery: Ignore
- Jitter Control: Disable
- Subcode Analysis: Auto
- Data Speed: Select Your Speed (Keep it low)
- Audio Speed: Select Your Speed (Keep it low)
- Read Retry Count: Select How Many Times You Want CDRWin To Retry Reading Damaged Data Before It Fails
- Recording Options
- Uncheck All Boxes On The Top Line
- Number Of Discs To Backup: Select Number Of Discs
- Number Of Copies: Select Number Of Copies You Want
- Speed: Select Your Burning Speed (Keep it low)
- Disc Transporter Mode: Disable If you want, select Save Settings at the side
- Hit Start.
http://www.totse.com/en/hack/software_cracking/163083.html
Sticky plz?
Dis is my sig and I hope you like it!
Join TK's forums! http://fgfcheating.jconserv.net,
(This post was edited by mastermalik5 on Dec 5, 2005, 7:21 AM)
|
FORUM
SEARCH
WHO'S 
LOG 
RULES / FAQ
